Launching Fall 2026. We're completing Washington contractor registration — nothing is for sale here yet. Join the waitlist for first-slot priority.
Salish Water WorksPuget Sound · Water Treatment

Lewis County · System ID 58200 · Community water system

Is Napavine City Of’s water safe? PFAS test results (Lewis County, WA)

PFAS above Washington’s state action level

Napavine City Of detected PFAS in 2 of its 5 tested water sources, with at least one result above Washington’s state action level (latest test September 2025).

Community water system serving Lewis County · 889 connections · about 3,095 people.

At least one individual sample measured at or above a federal MCL value (4 ng/L for PFOA/PFOS; 10 ng/L for PFHxS, PFNA, HFPO-DA). Compliance with the federal standard is judged on running annual averages at the tap — a single source sample at that level is a flag, not a violation.

PFAS results on record for Napavine City Of

AnalyteHighest resultWA action levelFederal MCLDetected at source
PFNA
Perfluorononanoic acid
55 ng/L above SAL 9 ng/L 10 ng/L WELL #2 AFM910, WELL #3 AFM909
PFOS
Perfluorooctanesulfonic acid
34 ng/L above SAL 15 ng/L 4 ng/L WELL #2 AFM910, WELL #3 AFM909
PFHxS
Perfluorohexanesulfonic acid
23 ng/L 65 ng/L 10 ng/L WELL #2 AFM910, WELL #3 AFM909
PFBS
Perfluorobutanesulfonic acid
6 ng/L 345 ng/L WELL #2 AFM910, WELL #3 AFM909
PFOA
Perfluorooctanoic acid
6 ng/L 10 ng/L 4 ng/L WELL #2 AFM910, WELL #3 AFM909
PFHxA
Perfluorohexanoic acid
4 ng/L WELL #2 AFM910
PFPeS
Perfluoropentanesulfonic acid
3 ng/L WELL #3 AFM909
PFHpA
Perfluoroheptanoic acid
2 ng/L WELL #2 AFM910

What this means

A Washington state action level (SAL) is the concentration at which the state requires a water system to notify its customers and take action — typically treating the affected source, blending it, or taking it offline. PFAS was detected in 2 of the 5 sources tested for this system, and at least one result was above a SAL. Ask the utility what it has done with the affected sources since the sample date — the table above shows which sources were affected.

For PFAS at the drinking tap, the fix we plan to offer is under-sink reverse osmosis — manufacturer test data shows RO membranes reduce PFAS. See the planned systems.

These results describe the water system’s sources (wells, intakes), not any individual tap — utilities blend, treat, and rotate sources. Data: Washington State Department of Health public PFAS results and Drinking Water Service Areas, dataset updated 2026-07-22. Latest test on record for this system: 2025-09-30. Informational only — not a certification of water quality and not health advice. If you have concerns about your drinking water, contact your utility or the WA DOH Office of Drinking Water.

Free · takes ten seconds · no signup

Is this actually your water system?

Service areas overlap and addresses sit on boundaries. Enter your street address in our free checker and we’ll match it to the right system in state records — 1,294 Puget Sound systems tested so far, 302 with detections.

Check your address free Join the launch waitlist — free

Why "waitlist" and not "book now": Salish Water Works is completing its Washington contractor registration (RCW 18.27). Until that's done, we don't offer, bid, or perform installation work, and nothing here is for sale. The waitlist is free and non-binding — it just holds your place for launch.

← All Lewis County PFAS results · All counties