Pierce County · System ID 45550 · Community water system
Is Lakewood Water District’s water safe? PFAS test results (Pierce County, WA)
PFAS above Washington’s state action level
Lakewood Water District detected PFAS in 6 of its 21 tested water sources, with at least one result above Washington’s state action level (latest test June 2026).
Community water system serving Pierce County · 28,001 connections · about 82,425 people.
At least one individual sample measured at or above a federal MCL value (4 ng/L for PFOA/PFOS; 10 ng/L for PFHxS, PFNA, HFPO-DA). Compliance with the federal standard is judged on running annual averages at the tap — a single source sample at that level is a flag, not a violation.
PFAS results on record for Lakewood Water District
| Analyte | Highest result | WA action level | Federal MCL | Detected at source |
|---|---|---|---|---|
| PFHxS Perfluorohexanesulfonic acid | 22 ng/L | 65 ng/L | 10 ng/L | 88th & Pine J-1 and J-3, H-1 & H-2 Ponders, Interlaaken D-3 ACY107, Washington Blvd E-3 |
| PFOS Perfluorooctanesulfonic acid | 22 ng/L above SAL | 15 ng/L | 4 ng/L | 88th & Pine J-1 and J-3, H-1 & H-2 Ponders, Interlaaken D-3 ACY107, Washington Blvd E-3 |
| PFBS Perfluorobutanesulfonic acid | 10 ng/L | 345 ng/L | — | 88th & Pine J-1 and J-3, H-1 & H-2 Ponders, Interlaaken D-3 ACY107, L-1, L-2 & L-3 Hemlock, S-1, Washington Blvd E-3 |
| PFHxA Perfluorohexanoic acid | 10 ng/L | — | — | 88th & Pine J-1 and J-3, H-1 & H-2 Ponders, Washington Blvd E-3 |
| PFOA Perfluorooctanoic acid | 10 ng/L | 10 ng/L | 4 ng/L | 88th & Pine J-1 and J-3, H-1 & H-2 Ponders, Interlaaken D-3 ACY107, Washington Blvd E-3 |
| PFHpA Perfluoroheptanoic acid | 5 ng/L | — | — | 88th & Pine J-1 and J-3, H-1 & H-2 Ponders, Washington Blvd E-3 |
| PFNA Perfluorononanoic acid | 5 ng/L | 9 ng/L | 10 ng/L | Washington Blvd E-3 |
What this means
A Washington state action level (SAL) is the concentration at which the state requires a water system to notify its customers and take action — typically treating the affected source, blending it, or taking it offline. PFAS was detected in 6 of the 21 sources tested for this system, and at least one result was above a SAL. Ask the utility what it has done with the affected sources since the sample date — the table above shows which sources were affected.
For PFAS at the drinking tap, the fix we plan to offer is under-sink reverse osmosis — manufacturer test data shows RO membranes reduce PFAS. See the planned systems.
These results describe the water system’s sources (wells, intakes), not any individual tap — utilities blend, treat, and rotate sources. Data: Washington State Department of Health public PFAS results and Drinking Water Service Areas, dataset updated 2026-07-22. Latest test on record for this system: 2026-06-16. Informational only — not a certification of water quality and not health advice. If you have concerns about your drinking water, contact your utility or the WA DOH Office of Drinking Water.
Free · takes ten seconds · no signup
Is this actually your water system?
Service areas overlap and addresses sit on boundaries. Enter your street address in our free checker and we’ll match it to the right system in state records — 1,294 Puget Sound systems tested so far, 302 with detections.