Pierce County · System ID 22916 · Community water system
Is Spanaway Village Water System’s water safe? PFAS test results (Pierce County, WA)
PFAS detected — below state action levels
Spanaway Village Water System detected PFAS in 1 of its 1 tested water source; every result in the current state dataset (2021–present) is below Washington’s state action levels (latest test March 2026).
Community water system serving Pierce County · 55 connections · about 125 people.
At least one individual sample measured at or above a federal MCL value (4 ng/L for PFOA/PFOS; 10 ng/L for PFHxS, PFNA, HFPO-DA). Compliance with the federal standard is judged on running annual averages at the tap — a single source sample at that level is a flag, not a violation.
PFAS results on record for Spanaway Village Water System
| Analyte | Highest result | WA action level | Federal MCL | Detected at source |
|---|---|---|---|---|
| PFOS Perfluorooctanesulfonic acid | 7 ng/L | 15 ng/L | 4 ng/L | WELL ACM776 |
| PFBS Perfluorobutanesulfonic acid | 6 ng/L | 345 ng/L | — | WELL ACM776 |
| PFHxA Perfluorohexanoic acid | 6 ng/L | — | — | WELL ACM776 |
| PFPeA Perfluoropentanoic acid | 6 ng/L | — | — | WELL ACM776 |
| PFOA Perfluorooctanoic acid | 5 ng/L | 10 ng/L | 4 ng/L | WELL ACM776 |
| PFBA Perfluorobutanoic acid | 2 ng/L | — | — | WELL ACM776 |
What this means
PFAS was detected in 1 of the 1 sources tested for this system, and every result in the current state dataset (2021–present) is below Washington’s state action levels — the thresholds at which the state requires customer notification and action. Detected-but-below-action-level is exactly what it sounds like: PFAS is present in at least one source at low levels, and the state does not currently require the utility to act on it.
If you’d rather not drink detectable PFAS at any level, the at-the-tap option we plan to offer is under-sink reverse osmosis — manufacturer test data shows RO membranes reduce PFAS. See the planned systems.
These results describe the water system’s sources (wells, intakes), not any individual tap — utilities blend, treat, and rotate sources. Data: Washington State Department of Health public PFAS results and Drinking Water Service Areas, dataset updated 2026-07-22. Latest test on record for this system: 2026-03-24. Informational only — not a certification of water quality and not health advice. If you have concerns about your drinking water, contact your utility or the WA DOH Office of Drinking Water.
Free · takes ten seconds · no signup
Is this actually your water system?
Service areas overlap and addresses sit on boundaries. Enter your street address in our free checker and we’ll match it to the right system in state records — 1,294 Puget Sound systems tested so far, 302 with detections.